How to choose a good monument on the grave? Useful tips for those who have not chosen. Monuments - a monument on the grave - the manufacture and installation of monuments which monument is better to choose

Immediately after the funeral on the grave hill there is a cross with a sign on which the name and dates of life and death are written. The monument at the request of relatives is established in a year when the soil falls. The cemetery administration determines the time in a year when the monuments are allowed to establish. As a rule, it is 5 months from May 15 to October 15. The main condition so that the earth is soft and not stuffing. The monument is installed in good weather without rain.

In order to replace the tombstone monument, it is necessary on the basis of the death certificate to submit a statement by the cemetery administration. To submit this statement can only one who at the funeral was appointed responsible for the burial, and accordingly, he has a certificate of fabrication of tombstones.

To obtain permission to install the monument you will need to provide the administration passport, a certificate of building a tombstone, an agreement with the payment receipt, where it is indicated that you ordered a monument or a fence, and you will also need to write a statement.

Usually the installation of the monuments is carried out by the administration of the cemetery. However, you can also apply with what you want to install on your own. It should be understood that monuments, flower beds, fences belong to your personal property and the administration is not responsible for their damage.

Before establishing a monument, ask the administration about rulesAmong which may be the fact that the monument should not impede and close access to other graves, it should be reliable information, the right dates and pho. By law, it is impossible to use one big monument to 3 for example, the relative graves, as confusion can occur. The monument should not be over the boundaries of the site, and its size, for example, in some cemeteries is regulated by no more than two meters in height.

Flands include the same rules. Not at all cemeteries can generally install a fence, on those that you can, first need to submit a written statement. The feet should not overlap access to other graves, the size of the fence must correspond to the size of the site, on average height - 0.5 meters, it is prohibited to use sharp peak.

What monument to choose?

Photo on metal on the cross: For a temporary monument, as a rule, a wooden cross is put with a sign. Sometimes relatives are ordered for a temporary monument photo on metal. This photo is no different from the photoseramics, except that it has a fear of cavity, in order to be easily attached to a wooden cross. However, as a rule, this is a temporary option until the main monument is installed:
For a permanent monument, people traditionally choose between marble and granite. Marble cheaper, granite more expensive.

Marble monument There is a light color, and therefore it does not make engraving, that is, the Master will not be able to transfer the image itself and inscriptions directly to the stone, as it will be clearly visible. Not some still knock out a portrait on a light stone:

Therefore, most often the monument is attached to additional plates from the granite, where the inscriptions or images are already knocked out (in the center of the circle of granite):

Or use photoseramics, gluing an oval color photo to the monument:

Although marble is rarely found black colorHowever, he with pronounced white splashes:

Marble more supportive material made of stunning statues, monuments, sculptures. In any case, marble is more suitable for decor elements, such as it, you can make such a cross, as you can see, the sign of the granite was added down below, to leave the inscription, I decided not to do the photo:

To add a photo to a monument to add a photo any photo sealed in glass:

Because of its advantage and relative softness, marble is inferior to granite on durability, under the onslaught of nature, the inscriptions are discolored, the color of the stone dirty, small cracks can appear, and the bright monuments are faster than dirty. At least once every 5 years, you need to call the wizards so that it update the protective layer on the monument and, if necessary, made a restoration.

Granite is a more resistant material, but it practically does not make complex sculptural works, often marble and granite combine together in one monument. Granite has a lot of species and colors from yellow to red. However, for portraits drawn on the stone, only black colors are used for the rest, as well as for marble, you will have to use inserts.

Karelian and Australian gabbro-diabases are considered the best, Ukrainian cheaper, but less qualitative. In any case, the agency will be prompted to you and select a monument depending on what you want to do with it: the image, the inscription, or it will be a sculpture.

If you want image or inscriptions were straight on the stoneYou need to take black granite. Previously, the image on black granite was transferred artists. The process is complicated, but it is high-quality. In the image, the artist puts the soul, the images are obtained as a living.

In addition, with personal climbing with spokes, the image is obtained resistant and reliable. Today, increasingly ritual firms acquire the so-called engraving machines, in this case everything you need, it is to put a photo into the printer, and the machine itself "sticks out" and chooses a portrait on a granite. After the car sees the portrait, the image stone is transmitted to the engraver, which comes up and completes the non-breaking areas, in general, brings the portrait to the desired state.

In addition to direct photos, behind the granite often depict what the deceased loved. For example, the artist will be able to knock out a car, a summer garden, the sea, and much more. Therefore, if you want a truly high-quality image on the monument, after all, find the ritual agency with real artists who can transfer the image as a living.

Before ordering an image on granite look at the portfolio Artists:

Every artist is individual and in his own way sees and transfers the image to the monument. Colored image is obtained by applying special paint to a monument, after directly engraving. As for the design itself, it can be any, only you decide which form, size, material will be a monument. It can be in the shape of a heart, cross, steles, and many other forms.

In any case, contacting the ritual agency, you will help you choose something like. However, remember that natural stone is always more expensive than artificial, the artist's work is more expensive than the operation of the automatic machine.

Council. Carefully choose granite. Any granite monument not Purely black, if it carefully looks around, it has a grainy structure, these intersions affect the work of artists. Imagine that exactly in the place where the eye pupil should be located, a light spot, and if there are many such stains, then the image may turn out to be slightly worse than if the inclusions were smaller. However, an experienced artist will always be able to withdraw a portrait, though on such a stone to make it it will be harder.

Output. To begin with, decide whether you want the deceased on the monument. Then select exactly how you want to transfer the image to the monument: photo ceramics, a portrait in a glass, an artist or a car draws on the monument itself.

For example, if you wish to use the photo in the glass, then you do not need to choose black granite, you can choose a monument of any color, because the photograph of the deceased will simply be built into the stone. For not black granite monuments, workshops, as a rule, make special inscriptions that are not knocked out on the stone, but as if stick to it.

Be sure to ask how it will look! Not rare cases when in ignorance, people ordered engraving the inscriptions or even portrait on the bright marble or other stones are not intended for this. It goes cheaper, but looks like white on white.

Also ask what technology to apply the image to choose? For example, you want to order photoceramics. Decal is more resistant, high-quality and expensive, and the thermalransfer is cheaper, is manufactured faster, but less high-quality and more suitable as a temporary option for the cross.

In addition, there are different types of ceramics: the ceramics with a slipper - cheaper and less high-quality, dry pressing ceramics - more expensive, but high quality. And porcelain stoneware, which is ideal for accommodating a large portrait.

Compare both options and select the right one to you. Remember that the photo ceramics can be of any shape and size, from standard oval to a rectangle. Image application technology on the monument itself is called engraving, it happens two types: manual - when the image knocks out the artist and automatic when it makes the machine. It is believed that the images made by hand are more persistent and durable.

Questions and answers:

Portrait on the monument does not look like:

You may have given too little photography and the artist brought what was depicted in the photo, but in real life a person looked somewhat differently. In any case, before the start of the artist, you had to show an enlarged image, and show that in the end it will turn out. If the image is very different from what you have shown, you can order a grinding of a monument to redraw an image or use another way of applying an image, for example, photo camera.

In practice, there are often dissatisfied customers who do not like the image, which is exactly as in the photo, however, relatives argue that in life a person is completely different than in the photo. But the artist, simply can't know which person was in life, so you should not expect from him over a miracle. The image is obtained precisely as in the photo, only in the black and white version.

How to take a photo from the monument?

If it is photoseramics, then it is usually tightly glued to the monument. However, you can try carefully with the help of the chisels and a hammer to break through the edges of the portrait. Be prepared for the fact that the photofuric product will crack and come into disrepair.

How to transfer the photo to the monument with your own hands?

If you are not an artist, then in no way. Even if you know how to draw portraits, then you need special equipment: knitting needles, machine for engraving or oven for firing photoseramics. However, it happens that people themselves knock out the inscriptions on the stone and they decorate it themselves:

What is the photo called a monument?

So call, photo for a monument. Often you can find the names - portrait engraving on a monument or photo ceramics for a monument.

Care behind the monument from granite and marble

Granite. Granite has one unpleasant moment, it literally absorbs fat, and therefore all your fingers can be imprinted on it. If this happened, then cleaned the monument problematic, but plus in the fact that during the month a small spot will evaporate.

If the stain must be displayed, you can use soda. Apply a teaspoon of soda to a bold spot and water until the soda is reminding yogurt. When the solution is dry (about a day) simply erase it.

To clean the granite monument from dust and dirt, you can use special funds purchased in the store, as well as using a conventional soft cloth moistened in warm water. Sometimes a weak soap solution is used.

Use household chemicals that you wash your kitchen! After cleaning the monument, it is wiped with a dry cloth so that there are no divorces left. Council: Special napkins for stones are sold in stores, the rubbed is all pure and no divorces.

If there are cracks on the granite, even small things must be smeared with a special putty for stone. If this is not done, then in winter, the moisture during freezing can contribute to the destruction of the stone. If you notice that drops when hitting a monument are not going to the ballsIt's time to update the protective layer of the monument. For this, after cleaning with soap solution, apply a special tool (most often it is spray) and give sealants to absorb about 15 minutes. After 15 minutes with a dry cloth, remove the excess sealant.

If the granite got paint, it is better to purchase a special solvent for stone. The inscriptions and portraits on the monuments are not recommended to restore independently, for this you need to contact professionals.

Marble. Marble is cheaper, which means more problematic material. As a rule, in the workshop, light and black marble are covered with a special composition that impedes pollution and fading in the sun. The marble is poorly tolerated moisture and high temperatures. The rag when wiping does not need to be very wetted in water. Carefully need to handle the candle without affirming it too close for a long time.

Also as on the granite, the marble may remain fat fingerprints, once again the monument is better not to touch, or do it in gloves. When cleaning a marble monument, as a rule, cost a simple soft cloth or a sponge moistened in warm water. If necessary, use either special means for cleaning marble, or low-pH detergents.

Conventional detergents can harm the monument. Pulling the monument and give him to dry, apply a protective agent and wait until it is absorbed. After the fading agent is applied (if marble color). Then the special water repellent composition is applied. To protect the inscriptions, you can use a special emulsion to protect engraving.

Remember, if you have a vase installed, then before winter it is necessary to pour out the water.

If the appearance of your monument is no longer happy if he lost color, cracks appeared on it, the image and the inscription at the expiration of time began to get rid, then it is better to contact the specialists who will hold all the necessary procedures for the restoration of the monument and give it the best appearance. Usually such services are ordered 1 time in 5 years.

What to do with a cross after installing the monument?

In fact, there are not so many options:

1. Wooden cross next to the monument. Some people honored traditions and believe that the cross must necessarily be on the grave, especially if the cross is not depicted on the monument itself.

2.Pripping workers who establish a monument to take a cross or ask where it can be attributed. For example, in the temple, which is located next to the cemetery.

3. Skuff the cross in the gravestone grave.

4. Treat the cross of the poor, who need a family to carry out a funeral.

5. The cross the cross, if it was wooden. In no case can you not throw a cross in the trash can near the cemetery, also the cross can not be sold.

What to write on the monument?

On the monument, in addition to the full name, surname, patronymic, the dates of birth and death, people sometimes want to write epitaph. Epitaph These are the words of condolences, for example: remember, love, mourn.

The monument serves us in order for us to remember. At the end of the epitaph, many are asked to portray rose, or other flowers. The text of the epitaph can be invented as relatives themselves, and taken from the network. Usually it is a phrase expressing the feelings of grieving or talking about achievements - good qualities of the deceased. However, nothing forbids you to use any phrase you want to see on the grave of an expensive person, such as your poems.

It must be remembered that if the text is big, then you need to say in advance about the fact that you want to place the epitaph. Since the photo is first located on the monument, then the name, then the date of birth and the date of death and only then the epitaph and if there is a desire and place, then at the end can add rosette. Optionally, or if there is no place ahead, warm words can be placed on the back of the monument, or on the reverse side you can make a three-dimensional image.

How to choose a photo on the monument?

If the photo will simply be placed in a hermetic glass and is fixed on the monument, then any photo you like. However, most often the photo will be needed to transfer the image to ceramics, or the stone itself. Earlier for photo ceramics It was preferred to use black and white pictures, but today color images due to special solutions will not fill in the sun. Photo ceramic image is usually small in the form of an oval, and therefore the photo requirements are below. Important So that the face in the photo was large. The more the photos will have to increase, the more the photo will lose in quality. It is also necessary to understand that old photos printed on matte paper are strongly grain. If possible it is better to use a glossy photo.

Engraving. In engraving, the size of the photo is also very important. If in the photo with an increase will not be visible, for example, the detail of the eye, then the artist (if painted the artist) will have to draw my eyes yourself. Imagine that you give a photo of 3 to 4, and it is increased to the A4 format to move to the monument. Of course, in this case, the image loses quality.

The greater the image of the face, the easier it is to portray the exact portrait.

There are difficult cases when the artist brings a small shabby photo from the passport, as other photos simply not preserved. Then besides the enlarged copy, the artist uses a magnifying glass, peering into small details of the face and redraws (knocks out) these details on the monument. However, in this case, in all other cases, when the photo is too small and very poorly visible details, the artist does not guarantee 100% similarity with the original, but the similarity with a small photo is guaranteed.

Many workshops on making images on the monument are able to use photoshop and retouche.

Show a person in a hat?

For some reason, this is considered a bad tone, however, if a person wore a cap all his life, he loved her very much and he was in her almost all the photos, then why not portray him in his favorite cap? However, some are asked to remove the headdress with the help of photoshop.

What age is the person to depict a person?

Anyone you want. There are no religious and ethical considerations on this issue. There are people who believe and depict the photo closest in the time of death, and someone believes that you can portray an old person in the breakdown when he was still in the prime.

Output: Use photos where a clearly visible face and small details of the face. The more photo, the better. If possible, use a glossy photo. In the workshop you will help you choose a photo, you can select and take the best pictures of the late. As a rule, with you immediately print an increased photo in the photo so that you can see that in the end it will turn out.

This article is devoted not to the value of the monument, but what kind of quality work should be made and what materials are used.

When it was time to order a monument, you do not need to be kept on various rumors and superstitions that give allegedly the exact deadlines for the proper installation of this facility from the date of burial.

This is not true, since such a clear time does not exist. Works can be carried out already after 2 months, or even years. On this issue there are no recommendations and the church.

In order not to arise in the future, no misunderstandings with the owners of the cemetery or relatives of the buried in the next grave, make accurate measurements of your area without going beyond her borders.

If there is a monument that you want to replace, it is worth removing it with your own hands. First you need to remove the photo from it and the name plate. And then for the ease of transfer to destroy it with a sledgehammer.

So, it will be easier for you to transport it to places designed for garbage. Thus, your wallet will save about 2 thousand rubles. After this procedure, you can search for firms providing services you are interested in.

You need to be prepared for the fact that the manufacture of the monument will be not cheap. However, a number of firms provide partial payment. That is, half of the cost must be given for work at once, and the residue can be given and during the year. At the same time, the storage of the finished monument is not paid.

Form and dimensions

On what monument to stop your choice? They are made of marble crumbs, natural or synthetic granite. The difference of materials is the fortress.

For example, a monument from marble crumbs with a black insert will be weaker than granite. Although it is cheaper, but his quality is many worse.

Therefore, it will be better to order a small stele from granite. In addition, this material is well amenable to the masters to purchase the necessary forms. Monuments made of artificial granite and marble crumbs are usually made in advance, and it is impossible to change the dimensions and shapes.

The next step will be an engraving. This is quite an important moment in the design of the tombstone. If you are planning that the photo will be engraved on the monument, then pay attention to other works of the master.

Rate them in quality, the portrait must accurately copy the image in the photo, and should not be flat. And also make sure that the work is performed with smooth letters. Check how engraving is performed: manual or mechanical.

The best option will be the monuments made by the wizard's hands. Of course, they will be higher than the cost, but they will last longer and will noticeably differ in quality.

You can also ask where the material was brought from. The best black granite happens if his homeland is Karelian deposits, Swedish, Ukrainian, Chinese and Italian careers.

Moreover, such a material should not change its shade with sunlight. High-quality granite does not have enclosures that are distinguished by stains and severe cracks.

If you have been found defects, you have the right to ask to make a discount. To find the most profitable option, pass through several firms by specifying the cost of work on the same parameters.

When the monument is made, it is not necessary to observe its installation. Workers will do everything themselves, they will just show only the burial place.

You can check the readiness of the order after installation. Carefully inspect the finished monument, the place of the joints, whether it was exactly set, whether there are no climbing. After that, be sure to check about the guarantee.

In order to get rid of the grave of the grave of grass, you can concrete a platform. If there is still money in the reserve, you can decorate it with tiles. As a cheaper option, it will be enough to cover the ground with a layer of rubble, under which the polyethylene is pre-put.

In compliance with this minimum number of tips, you can not spend your money resources in vain and you will be satisfied with a manufactured monument on the grave.

Seven aspects that need to be clarified before ordering a monument.

1. What graveyard will be buried on the dead?

This question is much more important than it may seem at first glance:

• In addition to the overall graded monuments, there is own regulations. Each has the right to nominate its requirements. They concern gabarites Steli., Possibilities to install fence, limit dimensions of the site And even installation brigades.
• It is necessary to take into account the age of the cemetery and the degree of its well-groomed. An elegant fragile monument, for example, on the old and abandoned cemetery can become victim of a number of circumstances - negligent appeal, destruction of neighboring tombstones, falling branches from trees and, alas, including vandalism or theft.
• Matters and how will look a monument among others. Modern, expensive and catchy tombstone can look inappropriate and screaming on the background of old and modest stele or simply get lost on a general background if the cemetery is close and thumbs up with trees.

2. For how long is this tombstone monument set?

This question seems strange only at first glance. Many first put on the grave temporary gravestone monumentsIn a few years a few years change it to a permanent, more reliable.

• One thing - if it monument on the grave of an elderly person, a distant relative, the latter in the family. Then the tombstone must be installed "once and for all," and it is worth it if it is simple, then maximum durable.
• Other - if on the same site will be buried and other family members And it is envisaged to replace the monument over time in subsequent burials.
• You can stay on or family memorial, but about it, the more you need to think in advance.

3. Will there be a care for the monument and the grave regular?

If you do not plan at least twice a year to visit the grave, it is better to abandon plans for large-scale landscaping and restrict ourselves to unpretentious. And if the grave, presumably, will remain without care for the year and more, then on it, perhaps it is not necessary to plant flowers at all, and instead of a flower garden put a tombstone or lay out a plot with gravel or tiles.

The state of the monument itself depends on the regularity of the care. Some tombstones are for example - perfectly oppose any environmental impacts and weather vision. Another (such as marble tombstones) recommended annual processing to protect the pores of the stone from moisture and dust, and in the end, from pollution and cracks. Think about whether someone will be able in a few years.

4. What are your financial opportunities?

May differ tenfold. In addition, other expenses are added to the cost of the tombstone itself - for delivery, installation, decorative design, etc.

• There are enough opportunities save On the manufacture of a monument without prejudice to the final result. This is advanced (in the fall and winter), the acquisition of typical tombstones, refusal of complex forms and minimizing handmade in the finish - for example, the choice instead of manual. Delivery and installation of a simple monument also can be made independently if necessary.
• But not everyone should save. First of all, this is the material. Tombstone monuments are cheaper than from natural stone. But it is very likely that after a few seasons you are waiting for additional investments in the restoration, and even in the replacement of stele.
• No need to save on preparation of the site For. Large and heavy tombstones and steles of non-standard shape with a displaced center of gravity, require high-quality and reliable foundation, and it is better not to neglect.

5. What kind of monument would you choose the deceased and what are the expectations of loved ones?

When choosing a monument, the customer tries to deserve his last debt before the late, demonstrate respect, and even make it "not worse, and better" than others.

• Logical when tombstone monuments reflect the person of the deceased, not customer. This expense can also have a specific willing of the deceased that needs to be respected. Someone wants a simple stone on his grave, and relatives are not too; Someone punishes to portray a favorite car or musical instrument on the stele - and this is the right of everyone.
• On the other hand, you need to reckon with the feelings of those who will visit the grave. In the case of a modest elderly man without a relatives, maybe you should not "let dust in the eye" complex shape of the monument or expensive material. But if the deceased was a young man, had many friends and relatives and left untimely, then an excessive asceticism in the design could cause a misunderstanding of visitors to the weather.
• This concerns I. religious monuments: In some cases, the deceased relatives will consider the relevant and elements of the design, for example, or tombstones.

6. What image should be on the monument?

Photo for portrait must comply with not only technical requirements, but also its intended purpose: light memories of the mustache. It is not necessary to use for this too late photos either those that the deceased person considered unsuccessful. If colored granite or gray marble is used for stela, then the portrait should be either engraved on a separate granite insert - a sign of portrait.

The image on the monument can be not only a portrait: In fact, you can put on the tombstone. But if the deceased was a man, it must be taken into account in the design of the monument to images. So, the Orthodox Church, nothing forbating anything, still approves modesty, and the canons of Sharia are not allowed to put the images of living beings on the tombstience. You can also refuse to apply images, limiting only the name of the deceased and the dates of his life.

Tombstone monuments can be individualize and in other ways: for example, using, bas-relief or ceramic inserts, combining different materials using wrought elements. When ordering a ready-made monument, it is possible to make it special due to additional accessories, bronze letters and symbols. The more relevant the personalization of the tombstones, the more important to obtain and approve the layout or the 3D model of the complex to its manufacture.

7. What accessories will decorate the monument and delated the grave?

You are not obliged to build on the site of burial something else besides the monument - even. But execute not only decorative, but also utilitarian functions. Vegetables and tables are obviously convenient to visitors. Kyoti and lamps are appropriate if believers can pray there. Vases, kashpo, vases and pergolas will decorate the grave. But on the contrary, they may worsen the impression if they are with faded flowers or empty. Provide in advance that from this will be usedAnd what - just stand idle. Complete the order for the manufacture of a graduate monument with useful accessories, and the grave will look more "less" and more well-groomed by caring relatives and friends.

Error №1

It lies in the fact that most often people start worrying about the monument is almost immediately before the planned installation of it on the grave.. That is, they come to the office of the company and ask to domonument As soon as possible, almost a week. At the same time, such customers are very surprised when they refuse to compressed deadlines, they even take offense to the company: they are in a hurry, it remains a little time to remember, and they do not want to meet. In such people sometimes it is impossible to explain that in a short time no good firmmonument Will not do. Do you yourself: the average time for manufacturing the order - 2 months, what if monument Not typical, then more. Furious customers want to listen to anything and regards to order. But in good agencies, customers are always a lot, therefore the queue is considerable.

In short, I realized thatmonument on the graveit is best to order somewhere for half a year before it is installed. Moreover, decent ritual companies always have warehouses for finished products, and it is stored until the desired term is free. So try to take care of the ordermonument A few months before installation, and you do not have to be nervous in the spring.

Error number 2.

- this is unsuccessful choice firms. To do not commit it, you must consider several factors and check something. Firstly, about after becoming some agency, find out if he has its own granite workshop. If not, it is better to look for another ritual firm, otherwise there are no problems. After all, no one is immune from the marriage of finished products. Then as a agency having a workshop, the marriage itself will eliminate.

Especially good, of course, if the firm has not only its workshops, but also a quarry. This happens infrequently, but it is found. In such, I found out the quality of the stone is always better and price for monuments below.

And of course, pay attention to different shares! Solid companies are often spent. For example, promotional discounts on monuments in winter. They are usually very good. This is explained: in winter orders in ritual agencies, people are sitting without work. But the shares are announced to raise the buyer's demand in this difficult time. So here, as in the proverb: Prepare Sani in the summer, but the cart in winter. I.e winter monument Buy much more profitablethan in other times of the year, and even more so in the spring, when customers in ritual firms are a lot.

Error number 3.

Often people are mistaken with. For example, do not take into account the climatic features of the terrain, on which the cemetery is located and, accordingly, the grave. And not yet figured out the characteristics of the stone.

Say, chose you marble monument. You will not say anything, marble is a beautiful and noble material.Monument Made, put, you are pleased with everyone. But in a year and a half, you suddenly notice that he, firstly, lost initial shine, Secondly, inlitched photos and inscriptions somehow "blurred". And in general, on your marble tombstone mold appeared! All this means that you, first of all, did not take into account the humidity of the air in your region. Increased humidity - Cause of fungus on marble. Secondly, the marble, indeed, fills in time, and the images on it are done more muddy.

I myself, when I orderedmonument, stove And other accessorieson the grave , stopped by granite. It is beautiful, has different color shades and durable. Granitemonument At the grave of my great-grandfather for more than 40 years, and it is almost like new.

Error number 4.

It is connected With wrong selecting a portrait on a monument. Sometimes people order, for example,too A large portrait, who or hardly fits into common dimensions, or interferes wisely and beautifully placed on the bodymonument Necessary and symbols. Sometimes another extreme happens: relatives want to have an image in full growth on a small gravestone. But you need to understand that such choice Suitable only for very largemonuments Otherwise, the face in the portrait will be too small.

But frustrated – large.

When you choose Photo for portrait, Try to not be group. Of course, modern computer technology will easily allow to separate the desired image from the group. But imagine now the feelings of those familiar deceased from the photo that will understand that it is she used as a prototype. After all, many of us are superstitious, prone to prejudices and hardly wanted such discovery. One more thing. So as not to be mistaken in selection, bring some possible photos to the artist, let him choose the appropriate one during the manufacture of portrait.

Error number 5.

Many make it focusing on Purchase monument cheaper. The desire to save is quite understandable. Most of us people are poor. Some unscrupulous ritual offices are playing on this. They sell cheapmonuments From surrogate materials, issuing an artificial stone for natural. And after a short timemonument on the grave Begins to crumble. It happens and attached, and it's a shame.

Remember my dear, that real granite, marble or other stone from a quarry. Hence the relatively high price of the workpiece under a truly durable tombstone. So that save with the mind: Better Use Promotions and Discounts offered by Agencies.

Here are my observations and conclusions on how you do not need choose a monument on the grave And what to take into account to avoid mistakes in this complex business and do not add unpleasant disappointments. I hope my experience will come in handy to anyone!

The choice of memorable tombstones is a serious and responsible question that cannot be solved in the turmoil. The fact is that the aesthetics of its type and duration of the service life directly depend on the selected material, the form, the process of registration.

In order to choose the optimal version of the tombstone in all respects, with its choice it is necessary to take into account some nuances.

When should I put a monument on the grave?

Experts believe that the monument should not be installed immediately after the funeral, it is optimal about this in about a year. This is due to the fact that the tombstone installed on a fresh grave can rather quickly deform or give cracks, as the Earth gradually begins to settle and tamper.

Under the influence of these processes, the support, which holds the foundation, is shifted, and with it the entire monument changes its position, from which further destruction occurs.

During the year, the soil must be completely settled, although there is an opinion that it is better to be restrained and establish a monument two years after the burial, and up to this point you can put a cheap temporary option.

We will also note that the installation of the monument is recommended only to be engaged in the warm season, this process is impossible in winter due to the strong freezing of the Earth.

However, it is possible to order a monument in winter, it will even be more profitable in many ways. Typically, manufacturers in the cold season offer their services with significant discounts, in such a period they have less work, therefore, enough time to perform complex types of work, most of them are ready to store the order for free to spring.

The monument must be combined with terrain

Specialists engaged in the manufacture of monuments, when placing the order, are asked to provide information on the peculiarities of the site, the nature of the soil of the place where the monument will be located. These data is necessary to select the optimal size and shape of a memorable tombstone.

Recall that the installation of the monument is one of the ways for relatives and loved ones to honor the memory of the deceased person, so when His choice should not be guided by the desire to stand out and emphasize their consistency, in this case such things are inappropriate and even unacceptable.

Marble or granite?

Nowadays, the assortment of materials used for the manufacture of gravestones is pretty large. The customer, focusing on small financial opportunities, can choose inexpensive options for monuments from decorative concrete, polymer granite, plastic, etc.

In this case, it should be borne in mind that such materials are significantly inferior in quality and appearance more expensive, so a small monument from granite in many senses is advantageous than cheaper, but more massive.

Today, natural stones such as marble and granite are greatly popular in the manufacture of gravestones.

Marble - white or gray stone of natural origin, which, thanks to its plasticity, is pretty simple in processing. The marble monument always looks solid, but it requires some care.

The material itself is quite fragile, the strong temperature differences and harsh weather conditions are undesirable.

Granite is also a natural stone, which differs from other materials with a reliable solid structure and special strength, so products from it are considered durable.

The monument from such a stone will serve not one hundred years, maintaining its original appearance even without special care. Unlike marble, he is not afraid of temperature differences and other natural phenomena.

The color gamut granite is very diverse, so the monument can be made in red, black, white, green, gray, depending on the preferences of the customer.

What form is it better to choose?

After it is possible to determine the material for the monument, you can move to the next step - select the size and shape for it.

Usually in the workshops you can consider ready-made sketches and choose from them, as well as almost everywhere there is the possibility of making a monument to individual order.

It is worth viewing that the cost of the finished product will depend not only on the price of the material, but also from the complexity of work.