How to draw a snow queen with a pencil step by step. How beautiful it is to draw the Snow Queen with a pencil step by step for children? How to draw the crown of the Snow Queen? Snow queen crown drawing for children

The Snow Queen is one of the main characters of the well-known fairy tale of the same name by the Danish storyteller Hans Christian Andersen. This is an imperious proud proud owner of the kingdom of eternal cold, ice and snow. She lives in the north and few people can see her. She can bewitch a person and turn his heart into a piece of ice. Then a person becomes indifferent to everyone, angry and thinks only of himself. And so it happened with the boy Kai. He ended up in the Snow Queen's palace. And his sister Gerda found him there and saved him from the spell of the Queen. We think many people have read this book. And if not, be sure to read it. And we will teach you how to draw a portrait of the Snow Queen in stages with a pencil.

Stage 1. First, let's sketch the lines along which we will draw the heroine's face. This is a cross, consisting of two intersecting straight lines, located slightly to the left of the middle of the sheet. This cross crosses the circle.

Stage 3. Draw the eyes of the heroine along the horizontal line. First, we will make the upper and lower eyelids, frame them with rather thick cilia, especially on the upper eyelids. We draw the eyes a little elongated, elongated. The Snow Queen is a contented beautiful woman, and her eyes should be cold and expressionless.

Stage 4. Between the eyelids, we show eyeballs with pupils. In the pupils it is necessary to reflect light reflections. Draw eyebrows on top of the eyes, their shape is also elongated. Eyebrows are shifted to the center.

Stage 5. Along the middle vertical line, draw the features of a thin long nose. The bridge of the nose is thin, the width of the nose itself to the nostrils is also thin, but the nostrils are already slightly widened to the sides. Under the nose we make the mouth of the heroine of our lesson. The upper and lower lip should be shown rather thin and slightly stretched. The Snow Queen almost never laughs, she is always dissatisfied and therefore her whole expression should show displeasure.

Stage 6. Now we rise above the forehead and draw the borders of the crown of the character. Her crown is located quite high on her head. The Queen has an open high forehead. The upper edges of the crown are drawn with sharp, jerky lines, they look like broken pieces of ice.

Stage 7. According to the triangles of the crown, we draw, as it were, the faces of ice crystals. They look like tree branches. This is the main feature, from which small minor dashes depart.

Stage 9. Behind the crown we make out the Queen's veil. It is long and descends from the very head down to the borders of the picture.

Stage 10. Here is such a Snow Queen as a result in black and white.

"Crown of the Snow Queen" costume fragment. Master - class from a series of master - classes "Working with waste material"

Realm of the Snow Queen
... On a sparkling ice floe
I look dreamily
There, inside it is a picture
I live find:
Behind the transparent smooth edge,
Perfectly clean and strict
illuminated by radiance,
The royal palace is visible! ..
Illa Mushe

I offer you another idea of ​​using waste material - SD disks.

Audience age: children of middle and senior school age, technology teachers and teachers of additional education.

Purpose: Crown for the Snow Queen costume.

Target: Craft a crown for the Snow Queen costume.

Tasks:
- to work out the ability and skills to carefully cut out the parts according to the drawing with a burner on the fabric;
- to form the ability to distribute a drawing according to a given shape;
- develop imagination and creativity.

The crown was made of precious metals (mainly gold) and richly decorated with precious stones and pearls. Crowns had different shapes (tiaras, diadems, hats, crowns, hoops with leaves, teeth and plates, etc.).
Creating the costume of the Snow Queen for the New Year's holiday, thinking about the crown of the Snow Queen, something cold, icy, iridescent seemed to be.
If you buy rhinestones - it turns out expensive for the price. And the disks are the best! When hit by rays of different colors, the disk shimmers with different colors of the rainbow. In the finished product, the illusion of rhinestones is created.
At low cost, the product looks decent. The peculiarity of the product is that the choice of disc sizes is limited and therefore the size of the crown depends on the selected discs.
To create the shape of the crown, you need to turn on the fantasy! I used one large and two small discs.

Working process:

1. Materials required for work:
- the remains of white fabric on a synthetic basis, bandeau, sequins, beads.
- SD disc, DVD large and small, threads, snowflake patterns.
- paper for transferring the picture, tracing paper.

Instruments:
- scissors, pins, pencil, marker, ruler, fabric burner, copy table (glass with backlight), iron.

2. Step by step process of making crafts

- We make a pattern of the crown. To get a symmetrical pattern, we bend the paper in half. We decorate the lower edge of the crown with a curved line, taking into account the size of the head (you can make an allowance for a different head size). We distribute disks. Finishing the top edge

- Cut out a drawing from paper (in this case, according to the principle of snowflakes). The size of the picture corresponds to the size of the disk from the outside. Closer to the center of the disk, do not go beyond the mirror part.
The drawing should resemble rhinestones of various shapes

- We translate the pattern of the crown onto tracing paper, in the intended places we translate the pattern from the "snowflakes". Outline with a marker

- We attach white fabric to the tracing paper with pins. We sit down at a backlit copy table and burn out the internal fragments from the middle of the work in order to avoid displacement or “bubble” of the fabric.

Attention! If you burn directly on the disk - the disk will burn through!

- Remove excess fabric

- We translate the pattern of the crown into a gang and cut it out. (Bando is a dense adhesive fabric).
We glue the bandeau with an iron on a white fabric intended for the lower part of the crown

- Put the discs between the top and bottom of the crown

- fasten with pins

We sit down at a backlit copy table and, along the outer contour of the gang, weld both layers of fabric together, simultaneously burning the contour lines of the two layers of fabric. A strong weld is formed along the cut line

- In order for the disks inside the crown not to move, we fix them along the contour - we sew sequins. If desired, you can additionally embroider with sequins all over the crown

- We fix the ends of the crown according to the desired size on the head. Crown ready

This technique can be used in the manufacture of stage costumes, for example, the Elvis Presley costume.

Enjoy your work!
Thank you for your attention!

Lyubov Lisenkova

I bring to your attention a master class on making a crown for the Snow Queen.

For work we need:

1. Thick paper (preferably cardboard or whatman paper)

2. Self-adhesive film (ideally silver, but blue is also possible)

3. Glue gun

4. Glue gun

5. White beads

6. Pearlescent sequins on a thread

7. Snowflakes are white

8. Semi-beads white glue-based

9. White semi-droplets on an adhesive basis.

11. Scissors

Manufacturing:

1. I made a crown pattern on thick white paper.

2. I glued a blue self-adhesive film (before the New Year I could not find a silvery film anywhere).

3. Let's start decorating the crown.

4. Using a glue gun, I glue mother-of-pearl sequins on a thread along the contour.

5. I decorate the crown with snowflakes (it can be ready-made, you can squeeze it out with a figured hole punch)

6. Since the crown of the Snow Queen has corners, I decorate them with white semi-beads on an adhesive basis.

7. In the central part, I add white glue-based semi-droplets to the rays of the snowflake.

8. I string beads on a thread or thin wire and glue the resulting pendants to the crown.

This is the crown I got.

Related publications:

I needed a crown for my character for a lesson with children. I thought about this for a long time - from what and how to make it so that it turned out and.

Scenario of the holiday "Tricks of the Snow Queen" Purpose: to create a festive mood for children and adults who came to the holiday; to form love for the mother, respect for the woman; develop.

Synopsis of a musical lesson for children of a combined orientation group of 6–7 years old “The Tricks of the Snow Queen” Tricks of the Snow Queen (Children enter the music room) M. R: I am glad to welcome you to the music room. (Communication is underway.

Integration of educational areas: cognitive development, speech development, social and communicative development, physical development.

Purpose: Christmas decoration, attribute for role-playing game, toy, gift. Goal: creating crafts using the origami technique. Tasks:.

Holiday scenario for children of the preparatory group "New Year's Adventures of the Snow Queen" Actors Adults: Leading Snow Queen Ded Moroz Children: Snow Maiden Gerda Kai Snowflakes (6) Three white horses (3) Atamansha Robbers.

New Year's party "Tricks of the Snow Queen" Leading. A wonderful day is coming. The New Year is coming to us. A holiday of laughter and fun. Fairy tale holiday for children. How beautiful it is in our hall, We.

At the New Year's carnival celebration, girls often play the role of a snowflake or a snow queen. If for the first case it is not difficult to choose an outfit, then in the latter case, the problem of finding a suitable headdress may arise. Unfortunately, a beautiful crown for the snow queen is rarely found in stores. Therefore, you usually have to make it yourself.

Ice Accessory

Such a crown has a "candy" effect due to the use of non-standard material.

In working on the product you will need:

• transparent PVC film or plastic (you can take old document covers);
• tulle with a silver pattern;
• cardboard;
• shiny fabric (under silver);
• thread, needle;
• scissors;
• thin wire;
• silver braid;
• elastic band 2 cm wide;
• hot glue;
• decorative elements (for decoration).

First of all, the circumference of the head is measured. Based on the measurement obtained, it is necessary to calculate the width of the base of the peaks of the future crown. There are seven of them in the product.

The height of the triangles is chosen individually. It is only necessary to take into account that the central triangle will be the highest. Details adjacent to the central part are cut out 2 cm shorter than the main one. The next two triangles are 2 cm lower than the previous ones, etc. Based on the principle described above, 7 triangles are cut out of the PVC film. Separately cut out the same parts of tulle.

A corresponding tulle detail is superimposed on each blank. A wire is sewn along the edge of the blanks using an overcast seam. All triangles are framed with silver braid. It is desirable to bend the figures slightly so that they keep their shape better. Finished transparent parts are assembled on an elastic band. The easiest way to do this is with a sewing machine. The ends of the product are connected into a ring.

To create a three-dimensional effect, you need to complement the crown with opaque elements. To do this, two triangles are cut out of cardboard. Since these details will be located on the front of the crown, their height should be just below the transparent triangles.

Cardboard blanks are sheathed with a shiny fabric and fixed with safety pins to the front "ice" of the crown, as in the photo.

Dense and transparent parts are attached to each other. It remains to decorate the crown to your own taste. In the work, you can use rhinestones, beads, sequins, lace elements.

The royal ice accessory is ready.

Quick option

Advice! It is quite possible to make a crown faster if you do not cut each clove of the product separately, but use the continuous pattern technique.

To do this, prepare:

• cardboard;
• fabric packaging for flowers;
• scissors;
• gum;
• silver braid;
• silver paper;
• threads;
• glue;
• sequins in the form of snowflakes.

A crown pattern is drawn on cardboard. The workpiece is cut out. The pattern is superimposed on the fabric and outlined with the expectation of allowances.

The fabric part must be cut out, then put on a cardboard layout. Allowances are folded to the back and glued to the cardboard.

Glue is applied from the wrong side of the workpiece, after which the crown is glued onto silver paper. Thus, unsightly allowances are hidden on the back of the product.

The crown is carefully carved. The product is decorated with large sequins in the form of snowflakes.

The contour of the crown is framed with a silver braid. Depending on the quality of the braid, you can glue it with hot glue or sew it on with your own hands.

The crown is ready. If the holiday is already "on the nose" and you urgently need to acquire a "snow" crown, then you can try a simplified version - a cardboard product. So that the crown does not look like a "hasty craft", it is advisable to replace the cardboard with a piece of light-colored wallpaper with a pattern.

A crown is drawn on it. The template needs to be cut out.

Then the workpiece is stained with silver spray paint. Since the aerosol tends to be sprayed in all directions, it is recommended to foresee this moment and paint in the corridor, after covering the floor with newspaper or polyethylene.

First you need to paint the wrong side of the product. On the front side, you need to carry out two stages of staining. After applying the first layer, you need to dry the product, and repeat the staining.

When the crown is completely dry, you can start decorating it. The edges of the product are decorated with piping with rhinestones or any silver braid. The crown is decorated with additional elements corresponding to the theme of the carnival costume.

The final step is to sew a wide elastic band around the edges of the product. You need to measure the elastic so that the crown fits snugly around the head.

The carnival headdress is ready to please its mistress. Any proposed master class will allow you to create an accessory not only for a child, but also for an adult. This is especially true for kindergarten teachers and leaders of theater groups.

Video on the topic of the article

A video compilation will help you better understand the process and make the product faster.