What to put on the grave? Tips for choosing a gravestone monument. When and what to put a monument on the grave? The best gravestone monuments

The monument on the grave put to keep the memory of a person. Stone - material durable and not destroyed by centuries. The inscription on it is the name, dates of life, epitaph - remind of a person. While lives the memory of the dead, he is alive. A century or a hundred years perceived by our ancestors as eternity. Hence the expression - "perpetuation of" memory.

Memory feeds not only by memories, but also by affairs. A visit to the grave, meetings for commemoration days, the publication of archives and the care of the grate - all this is the case, preserving and the shortcoming memory of the deceased. Material memory expression and at the same time a tool for saving memory and serve monuments.

Monument in the cemetery - the price of monuments on the grave

The cost of the monument depends on the rock, from which it is made, values, design and other factors. The monument on the cemetery can be from an expensive stone, for example, marble. Buy the granite monument is significantly cheaper. The choice is influenced by national traditions, wallet, faith and funeral rite.

When to put a monument on the grave? Act right!

When the grave hill is settled after time and the pain of loss is dulled, the time of concerns about the landscaping of the grave comes. And the first questions arise related to the monument: what will he be, who will make it when to put?

The opinion is common that so far the land does not fall, it is not worth doing the installation of the monument. This is not entirely true. Start preparation is better immediately 40 days later - choose and order a monument, strengthen the site. We recommend not to lose the year wasted and do not postpone the future what can be done today. The only limiter when choosing the installation time of the monument - to start work is needed in the warm season.

We advise you to consider the purchase of a monument in the cold season will cost much cheaper, as seasonal discounts act. At the same time, the time appears for the detailed coordination of the project and the manufacture of the monument ..

Strengthen the site

Start work to strengthen the grave immediately after it is established spring heat. The grave is overlapped with reinforced concrete beams, the edges of which are based on the solid ground, and the concrete base is laid over the beams. After that, you can put Paramemnik - it is reliably strengthened and insured against the sewage of the soil and skew.

What a monument will be

Decide what a monument will be. You can choose a finished project to the site or order your own option according to an individual sketch.

Ready monument

You can pick up a ready monument. Service Website (CJSC "Ritual-Service") offers a large selection of options, and the likelihood that you will stop on one of them are great. By choosing you like, you can only book a graduate inscription (epitaph) and a portrait. Two weeks later, everything will be ready for installation on the grave.

Individual Project Monument

What if the finished version did not suit? Order a monument on an individual project. It will cost more, but will be unique - such as you see. Site will offer several options for 3D projects developed on the basis of your wishes, thanks to which you can discuss the future monument in the family circle and make adjustments. After approval of the project, Masters-Kamneza will begin to work.

Epitaph and portrait

Important elements of the monument - epitaph and portrait. You will help you to choose a gravestone inscription and will apply it to the monument.

Installation of the monument on the grave

the site delivers a monument to the grave for free. Our installation service will professionally execute "turnkey" all the work on the preparation of the site and the installation of the tombstone at any cemetery of Moscow and the nearest Moscow region.

Care for graves

In addition to the manufacture of monuments, the site provides services for the improvement of graves and care for it. Order them to us, and the graves of your loved ones will always be neat and well-groomed.

Pick up the appropriate monument ─ the task is not easy and responsible.

It will last for many years if you carry out an unmistakable choice of materials from which it is manufactured, the forms of the tombstone and its design.

In this article we will give some necessary advice that will help to stay on choosing a qualitative monument.

When can I put a monument on the grave?

Many are inclined to the belief that the installation of the monument should be carried out no earlier than 12 months after the funeral.

Partly this is true. The fact is that the land on the grave is settled for quite a long time, which does not allow to carry out the high-quality installation of the tombstone.

There is a risk that the support of the monument can crack and damage will appear throughout the rest. The poorly rammed land will not give the necessary support to the established monument, which will lead to its displacement.

For one year the Earth completely will fall and will be lost. A considerable part of the masters in this area assures that it is advisable to wait 2 years, and during this period to install a cheap gravestone. Monuments are installed in the warm season, preferably in spring or summer.

In the cold and frost season, the mounting of the tombstones are not carried out due to the landscape of the Earth.

Carrying out the monument most economically in winter.

Many manufacturers of monuments in the winter period are not very littered with work and will be happy to fulfill the most time consuming order based on your preferences.

In addition, in winter, impressive discounts are provided that the budget will save.

You can pick up the "winter" purchase with the onset of heat, especially since the surcharge for safety will not need.

Binding to the environment

When choosing a monument, specialists need complete information of the terrain of the burial. In the manufacture of tombstones, factors such as the state of the soil should be taken into account, its structure, location of the grave and land relief.

Monuments are not installed in order to once again boast of others, but for the eternal memory of their people who have left their lives. Therefore, it is inappropriate to protrude your well-being and success in this way.

Selection of material

The choice of materials in modern workshops for the manufacture of tombstones amazes assortment. It all depends on the amount to which the customer is calculated.

Monument from crumb, plastic, polymer granite or decorative cement, is largely inferior in durability and beautiful appearance expensive materials.

If there is a desire to perpetuate the memory of your loved ones, it is worth paying attention to the monuments of their natural stone. Buy the granite monument of minor size will be more intelligent than to stop your choice on a large gravestone from marble crumb.

Monument from natural stone, can be created in a variety of variations, only fantasy needs. But the gravestone from the marble crumb or the granite polymer is manufactured over several template examples.

The most demanded today are natural stones such as granite and marble.

Natural marble. The stone is very malleable sawing, grinding and polishing. It happens both gray and white.

The marble is very fragile, sensitive to temperature drops and adverse weather conditions, unstable to the appearance of fungus, it is very quickly contaminated. But despite this, the marble monument is striking with beauty and with proper care will last long.

Natural granite. From the stone mined in the depths of Ukrainian lands, monuments from granite.

Such material is durable and highlighted by the goodness of the fortress. Without replacing the shape and retaining in the original form of the inscription, such a monument may have to breathe around the second centuries.

The granite stone does not need special care, immune to weather conditions and retains and retains polishing in primevarial form for many years.

The shades of the stone will come to every taste: red, black, greenish, gray and even the "snow king" of colors ─ white. The size, composition, processing method ─ from all these features will depend on the total cost of the granite monument.

Size and form

Once the choice of material for the tombstone is made, you can proceed to reflections on the design of the monument.

Experts can offer sketches of the most popular compositions, but can be ordered based on their preferences and fantasies.

It should be remembered that the big and exclusive monument will cost more. The size of the monument affects its durability.

What he is more and more massive, the longer he will like, which you can not say about the tombstones of a small size. They grow faster and can be destroyed.

To date, it is possible to order not only the granite monument itself, but also additional elements to it.

Creation of a beautiful memorial will help vases tables, benches, tiles, figurines, etc.

The bright memory of who left our world a man in his loved ones and native people remains forever. To the grave, the path does not overgrow, there are constantly lying flowers. To emphasize the love of the past and the depth of their grief, family members at the grave establish the tombstone, where the dates of birth and death are usually written, the name of the deceased, epitaph, often posted a photo (or knocked on the plate or printed). And what do the monuments do? Read about it in the article.

Installation of tombstones

Today, the monument can be ordered in every ritual bureau. Employees will provide you with a catalog with samples from which you can choose the appropriate option. Also, if you want, the tombstone can be made according to an individual sketch. Before placing an order, you need to choose the material. About what monuments make, you will be told in the office of the manufacturer's office. Take into account that the more qualitatively, the material will be stronger, the longer the tombstone will retain the initial species, however, the price, respectively, will be higher. Now the market offers all sorts of types of tombstones: from stone, metal, polymerranit, concrete, and even a tree. Consider the advantages and disadvantages of each option.

Natural stone monuments

Such tombstones are considered the most reliable and noble, they will look adequate for a long time and can stand in centuries. And what stone do monuments do from? The best material is considered to be granite, marble is not less often used. Talk about the properties of these stones.

1. Granite tombstones

This material under the influence of the rays of the Sun does not heat and does not flex, with temperature differences, it does not crack. The granite monument can have any thickness and shape, because the material is easy to handle. At the same time, you can be sure that the finished product will not have damage: cracks and chips. It will be possible to apply a portrait image of any complexity, and the surface from this does not lose accuracy and will not look too scratched. The advantage of this stone is also the fact that it is presented in a huge variety of color variations, so you can choose absolutely any color. Gabbro granite is most beautiful and expensive.

2. marble tombstones

This material is softer granite, therefore, and working with it is problematic. Perhaps the benefits can be attributed unless lower price. Cut portrait on such a stone is impossible, so it is usually fixed on it or photo.

Manufacturers make tombstones not only from natural marble, but also make monuments from artificial stone. In any case, the material requires regular care and is less durable than granite. If you live in a significant distance from the burial site and you have no opportunity to come to the cemetery to clean marble from pollution, it is better to choose another version of the tombstone. The fact is that stains remain on such monuments from fat and moisture, and color material is also different and low frost resistance.

Metal monuments

This group includes bronze, iron and other tombstones. Various metals have different properties, but have a general significant disadvantage - corrosion exposure. Unfortunately, vandalism should be feared. Metal products can be passed to the recyclable point, therefore there are cases when the monuments are simply carrying from the cemetery.

1. Tombstones from bronze

They look expensive and solid, even corrosion looks at them noble. Nevertheless, it is quite rare quite rarely, and bronze or bronze ornaments are often applied to stone slabs. Thus, it is possible to give individuality to the most modest tombstone.

2. Iron monuments

These products are simple and easy to install. But dismantling, unfortunately, will also not cause difficulties. In general, this material is better not to choose: it quickly rusts and easily deformed. To some extent, it will be possible to prevent such a situation if it is regularly painted with tombstones.

What material do the monuments still make?

Now often for this type of products is used polymerranit. It is a mixture and granite crumb, which is first molded in forms, and after frozen, is covered with a protective composition and decorated with decorative elements. Such a tomb is less than a stone, but it costs it cheaper. Despite the fact that an externally, the monument will be like a granite, inside it often happens. And this means that after some time the joints will begin to disperse, and the beautiful view will be lost. According to the manufacturing technology, polymerity products are very similar to the tombstones of stone crumbs. The difference consists only in the binder substance - instead of concrete, a polymer is used.

Other materials

Talking about what monuments do, it is impossible not to mention the concrete. From this material, the tombstones is completely distinguished, that is, besides concrete, no components are no longer present. Such a design is unreliable, even with competent reinforcement, the monument will not retain his original look: concrete will quickly crumble and under the influence of the external environment begins to crumble.

Finally

We listed not all the options for what monuments make. The choice is quite extensive; In order not to make a mistake, it is better to apply for advice to professionals. After all, it is important to establish such a tombstone, which will leave for the descendants the memory of the departed forever!

Church laws are not provided for this. To begin with, measure the length and width of the burial, when measurements do not go beyond the limits of the site, otherwise then there will be problems with the cemetery administration or with the owners of neighboring burials. If there is an old monument, it is preferable to dismantle it on its own. First remove old photos and signs, break a monument to a sledgehammer. Slices are easier to endure, each cemetery has a special place to utilize waste. After dismantling the old monument, you will save a couple of thousands. Next, we go on firms producing monuments.

Of course, order a monument to the case is expensive, but there is also concern. For example, most firms are asked to make a prepayment of 50%, it is possible to stretch payment even for a year, the storage of the monument must be free.

What monument to choose? There are several main species: marble crumb, natural granite, synthetic granite. A marble crumb with a black granite insert is cheaper, but it is not so strong as natural granite. It is sometimes easier to order a small granite stele than a set of marble crumb. Granite can always give the form that you wish. Marble crumb and monuments from Polymer Grinita are standard, change their appearance, the size is impossible (our "RusRanit" workshop since 2011 began the production of monuments from polymerity of any size, up to 120 x 140 cm).
If your plans are portrait engraving (not to be confused with the photo in the form of an oval) escaped to granite, then pay attention to other portrait works of this company, demand to show the quality. Look at the similarity of the original, the volume of portrait, it is important. Letters should be even, ask how and what they are doing. There must be handmade, the price of course on manual work is more, but such letters will always be visible, their appearance will be better in itself, they will not warm up from MCH, and, if desired, you can paint for example "under the bronze".

Ask where Granite is brought from. Black granite should not become gray or whiten. Good stones from Karelian fields, as well as from Ukrainian, sews, Chinese, Italian quarries.

Look at the structure of granite, there should be no foreign enclosures, bright spots, cracks. Otherwise, demand a discount (firms usually make concessions). Sorry the deadlines of full execution, usually this month (if you paid completely). You can still get around several firms in search of an acceptable price, ask the cost of the order and sketch sizing on paper, show other firms, and ask their price on the same order option, see the difference.

Behind the installation of the monument can not be followed, only to show the place. After everything is ready, you can evaluate the quality of installation, look at the "evenness", on the joints in the tile, clean. Check everything carefully, ask about the warranty period.

In order for the site did not borrow herbs, you can order the manufacture of a concrete site with a height of 5 centimeters and put it with tiles if it seems too expensive, you can pour the site only under the monument. This is not the only way to combat grass and thickets, you can float the area by rubble, pre-spreading a thick polyethylene film under it. It is desirable to cut all trees or hanging branches, otherwise the monument can be green. Observing at least part of these recommendations, you will get well done and will be satisfied with the type of burial.

Immediately after the funeral on the grave hill there is a cross with a sign on which the name and dates of life and death are written. The monument at the request of relatives is established in a year when the soil falls. The cemetery administration determines the time in a year when the monuments are allowed to establish. As a rule, it is 5 months from May 15 to October 15. The main condition so that the earth is soft and not stuffing. The monument is installed in good weather without rain.

In order to replace the tombstone monument, it is necessary on the basis of the death certificate to submit a statement by the cemetery administration. To submit this statement can only one who at the funeral was appointed responsible for the burial, and accordingly, he has a certificate of fabrication of tombstones.

To obtain permission to install the monument you will need to provide the administration passport, a certificate of building a tombstone, an agreement with the payment receipt, where it is indicated that you ordered a monument or a fence, and you will also need to write a statement.

Usually the installation of the monuments is carried out by the administration of the cemetery. However, you can also apply with what you want to install on your own. It should be understood that monuments, flower beds, fences belong to your personal property and the administration is not responsible for their damage.

Before establishing a monument, ask the administration about rulesAmong which may be the fact that the monument should not impede and close access to other graves, it should be reliable information, the right dates and pho. By law, it is impossible to use one big monument to 3 for example, the relative graves, as confusion can occur. The monument should not be over the boundaries of the site, and its size, for example, in some cemeteries is regulated by no more than two meters in height.

Flands include the same rules. Not at all cemeteries can generally install a fence, on those that you can, first need to submit a written statement. The feet should not overlap access to other graves, the size of the fence must correspond to the size of the site, on average height - 0.5 meters, it is prohibited to use sharp peak.

What monument to choose?

Photo on metal on the cross: For a temporary monument, as a rule, a wooden cross is put with a sign. Sometimes relatives are ordered for a temporary monument photo on metal. This photo is no different from the photoseramics, except that it has a fear of cavity, in order to be easily attached to a wooden cross. However, as a rule, this is a temporary option until the main monument is installed:
For a permanent monument, people traditionally choose between marble and granite. Marble cheaper, granite more expensive.

Marble monument There is a light color, and therefore it does not make engraving, that is, the Master will not be able to transfer the image itself and inscriptions directly to the stone, as it will be clearly visible. Not some still knock out a portrait on a light stone:

Therefore, most often the monument is attached to additional plates from the granite, where the inscriptions or images are already knocked out (in the center of the circle of granite):

Or use photoseramics, gluing an oval color photo to the monument:

Although marble is rarely found black colorHowever, he with pronounced white splashes:

Marble more supportive material made of stunning statues, monuments, sculptures. In any case, marble is more suitable for decor elements, such as it, you can make such a cross, as you can see, the sign of the granite was added down below, to leave the inscription, I decided not to do the photo:

To add a photo to a monument to add a photo any photo sealed in glass:

Because of its advantage and relative softness, marble is inferior to granite on durability, under the onslaught of nature, the inscriptions are discolored, the color of the stone dirty, small cracks can appear, and the bright monuments are faster than dirty. At least once every 5 years, you need to call the wizards so that it update the protective layer on the monument and, if necessary, made a restoration.

Granite is a more resistant material, but it practically does not make complex sculptural works, often marble and granite combine together in one monument. Granite has a lot of species and colors from yellow to red. However, for portraits drawn on the stone, only black colors are used for the rest, as well as for marble, you will have to use inserts.

Karelian and Australian gabbro-diabases are considered the best, Ukrainian cheaper, but less qualitative. In any case, the agency will be prompted to you and select a monument depending on what you want to do with it: the image, the inscription, or it will be a sculpture.

If you want image or inscriptions were straight on the stoneYou need to take black granite. Previously, the image on black granite was transferred artists. The process is complicated, but it is high-quality. In the image, the artist puts the soul, the images are obtained as a living.

In addition, with personal climbing with spokes, the image is obtained resistant and reliable. Today, increasingly ritual firms acquire the so-called engraving machines, in this case everything you need, it is to put a photo into the printer, and the machine itself "sticks out" and chooses a portrait on a granite. After the car sees the portrait, the image stone is transmitted to the engraver, which comes up and completes the non-breaking areas, in general, brings the portrait to the desired state.

In addition to direct photos, behind the granite often depict what the deceased loved. For example, the artist will be able to knock out a car, a summer garden, the sea, and much more. Therefore, if you want a truly high-quality image on the monument, after all, find the ritual agency with real artists who can transfer the image as a living.

Before ordering an image on granite look at the portfolio Artists:

Every artist is individual and in his own way sees and transfers the image to the monument. Colored image is obtained by applying special paint to a monument, after directly engraving. As for the design itself, it can be any, only you decide which form, size, material will be a monument. It can be in the shape of a heart, cross, steles, and many other forms.

In any case, contacting the ritual agency, you will help you choose something like. However, remember that natural stone is always more expensive than artificial, the artist's work is more expensive than the operation of the automatic machine.

Council. Carefully choose granite. Any granite monument not Purely black, if it carefully looks around, it has a grainy structure, these intersions affect the work of artists. Imagine that exactly in the place where the eye pupil should be located, a light spot, and if there are many such stains, then the image may turn out to be slightly worse than if the inclusions were smaller. However, an experienced artist will always be able to withdraw a portrait, though on such a stone to make it it will be harder.

Output. To begin with, decide whether you want the deceased on the monument. Then select exactly how you want to transfer the image to the monument: photo ceramics, a portrait in a glass, an artist or a car draws on the monument itself.

For example, if you wish to use the photo in the glass, then you do not need to choose black granite, you can choose a monument of any color, because the photograph of the deceased will simply be built into the stone. For not black granite monuments, workshops, as a rule, make special inscriptions that are not knocked out on the stone, but as if stick to it.

Be sure to ask how it will look! Not rare cases when in ignorance, people ordered engraving the inscriptions or even portrait on the bright marble or other stones are not intended for this. It goes cheaper, but looks like white on white.

Also ask what technology to apply the image to choose? For example, you want to order photoceramics. Decal is more resistant, high-quality and expensive, and the thermalransfer is cheaper, is manufactured faster, but less high-quality and more suitable as a temporary option for the cross.

In addition, there are different types of ceramics: the ceramics with a slipper - cheaper and less high-quality, dry pressing ceramics - more expensive, but high quality. And porcelain stoneware, which is ideal for accommodating a large portrait.

Compare both options and select the right one to you. Remember that the photo ceramics can be of any shape and size, from standard oval to a rectangle. Image application technology on the monument itself is called engraving, it happens two types: manual - when the image knocks out the artist and automatic when it makes the machine. It is believed that the images made by hand are more persistent and durable.

Questions and answers:

Portrait on the monument does not look like:

You may have given too little photography and the artist brought what was depicted in the photo, but in real life a person looked somewhat differently. In any case, before the start of the artist, you had to show an enlarged image, and show that in the end it will turn out. If the image is very different from what you have shown, you can order a grinding of a monument to redraw an image or use another way of applying an image, for example, photo camera.

In practice, there are often dissatisfied customers who do not like the image, which is exactly as in the photo, however, relatives argue that in life a person is completely different than in the photo. But the artist, simply can't know which person was in life, so you should not expect from him over a miracle. The image is obtained precisely as in the photo, only in the black and white version.

How to take a photo from the monument?

If it is photoseramics, then it is usually tightly glued to the monument. However, you can try carefully with the help of the chisels and a hammer to break through the edges of the portrait. Be prepared for the fact that the photofuric product will crack and come into disrepair.

How to transfer the photo to the monument with your own hands?

If you are not an artist, then in no way. Even if you know how to draw portraits, then you need special equipment: knitting needles, machine for engraving or oven for firing photoseramics. However, it happens that people themselves knock out the inscriptions on the stone and they decorate it themselves:

What is the photo called a monument?

So call, photo for a monument. Often you can find the names - portrait engraving on a monument or photo ceramics for a monument.

Care behind the monument from granite and marble

Granite. Granite has one unpleasant moment, it literally absorbs fat, and therefore all your fingers can be imprinted on it. If this happened, then cleaned the monument problematic, but plus in the fact that during the month a small spot will evaporate.

If the stain must be displayed, you can use soda. Apply a teaspoon of soda to a bold spot and water until the soda is reminding yogurt. When the solution is dry (about a day) simply erase it.

To clean the granite monument from dust and dirt, you can use special funds purchased in the store, as well as using a conventional soft cloth moistened in warm water. Sometimes a weak soap solution is used.

Use household chemicals that you wash your kitchen! After cleaning the monument, it is wiped with a dry cloth so that there are no divorces left. Council: Special napkins for stones are sold in stores, the rubbed is all pure and no divorces.

If there are cracks on the granite, even small things must be smeared with a special putty for stone. If this is not done, then in winter, the moisture during freezing can contribute to the destruction of the stone. If you notice that drops when hitting a monument are not going to the ballsIt's time to update the protective layer of the monument. For this, after cleaning with soap solution, apply a special tool (most often it is spray) and give sealants to absorb about 15 minutes. After 15 minutes with a dry cloth, remove the excess sealant.

If the granite got paint, it is better to purchase a special solvent for stone. The inscriptions and portraits on the monuments are not recommended to restore independently, for this you need to contact professionals.

Marble. Marble is cheaper, which means more problematic material. As a rule, in the workshop, light and black marble are covered with a special composition that impedes pollution and fading in the sun. The marble is poorly tolerated moisture and high temperatures. The rag when wiping does not need to be very wetted in water. Carefully need to handle the candle without affirming it too close for a long time.

Also as on the granite, the marble may remain fat fingerprints, once again the monument is better not to touch, or do it in gloves. When cleaning a marble monument, as a rule, cost a simple soft cloth or a sponge moistened in warm water. If necessary, use either special means for cleaning marble, or low-pH detergents.

Conventional detergents can harm the monument. Pulling the monument and give him to dry, apply a protective agent and wait until it is absorbed. After the fading agent is applied (if marble color). Then the special water repellent composition is applied. To protect the inscriptions, you can use a special emulsion to protect engraving.

Remember, if you have a vase installed, then before winter it is necessary to pour out the water.

If the appearance of your monument is no longer happy if he lost color, cracks appeared on it, the image and the inscription at the expiration of time began to get rid, then it is better to contact the specialists who will hold all the necessary procedures for the restoration of the monument and give it the best appearance. Usually such services are ordered 1 time in 5 years.

What to do with a cross after installing the monument?

In fact, there are not so many options:

1. Wooden cross next to the monument. Some people honored traditions and believe that the cross must necessarily be on the grave, especially if the cross is not depicted on the monument itself.

2.Pripping workers who establish a monument to take a cross or ask where it can be attributed. For example, in the temple, which is located next to the cemetery.

3. Skuff the cross in the gravestone grave.

4. Treat the cross of the poor, who need a family to carry out a funeral.

5. The cross the cross, if it was wooden. In no case can you not throw a cross in the trash can near the cemetery, also the cross can not be sold.

What to write on the monument?

On the monument, in addition to the full name, surname, patronymic, the dates of birth and death, people sometimes want to write epitaph. Epitaph These are the words of condolences, for example: remember, love, mourn.

The monument serves us in order for us to remember. At the end of the epitaph, many are asked to portray rose, or other flowers. The text of the epitaph can be invented as relatives themselves, and taken from the network. Usually it is a phrase expressing the feelings of grieving or talking about achievements - good qualities of the deceased. However, nothing forbids you to use any phrase you want to see on the grave of an expensive person, such as your poems.

It must be remembered that if the text is big, then you need to say in advance about the fact that you want to place the epitaph. Since the photo is first located on the monument, then the name, then the date of birth and the date of death and only then the epitaph and if there is a desire and place, then at the end can add rosette. Optionally, or if there is no place ahead, warm words can be placed on the back of the monument, or on the reverse side you can make a three-dimensional image.

How to choose a photo on the monument?

If the photo will simply be placed in a hermetic glass and is fixed on the monument, then any photo you like. However, most often the photo will be needed to transfer the image to ceramics, or the stone itself. Earlier for photo ceramics It was preferred to use black and white pictures, but today color images due to special solutions will not fill in the sun. Photo ceramic image is usually small in the form of an oval, and therefore the photo requirements are below. Important So that the face in the photo was large. The more the photos will have to increase, the more the photo will lose in quality. It is also necessary to understand that old photos printed on matte paper are strongly grain. If possible it is better to use a glossy photo.

Engraving. In engraving, the size of the photo is also very important. If in the photo with an increase will not be visible, for example, the detail of the eye, then the artist (if painted the artist) will have to draw my eyes yourself. Imagine that you give a photo of 3 to 4, and it is increased to the A4 format to move to the monument. Of course, in this case, the image loses quality.

The greater the image of the face, the easier it is to portray the exact portrait.

There are difficult cases when the artist brings a small shabby photo from the passport, as other photos simply not preserved. Then besides the enlarged copy, the artist uses a magnifying glass, peering into small details of the face and redraws (knocks out) these details on the monument. However, in this case, in all other cases, when the photo is too small and very poorly visible details, the artist does not guarantee 100% similarity with the original, but the similarity with a small photo is guaranteed.

Many workshops on making images on the monument are able to use photoshop and retouche.

Show a person in a hat?

For some reason, this is considered a bad tone, however, if a person wore a cap all his life, he loved her very much and he was in her almost all the photos, then why not portray him in his favorite cap? However, some are asked to remove the headdress with the help of photoshop.

What age is the person to depict a person?

Anyone you want. There are no religious and ethical considerations on this issue. There are people who believe and depict the photo closest in the time of death, and someone believes that you can portray an old person in the breakdown when he was still in the prime.

Output: Use photos where a clearly visible face and small details of the face. The more photo, the better. If possible, use a glossy photo. In the workshop you will help you choose a photo, you can select and take the best pictures of the late. As a rule, with you immediately print an increased photo in the photo so that you can see that in the end it will turn out.