Turquoise color how to mix paint. How to get turquoise

20.06.2020

Read also

Why did Sofya preferred to Chapkom Mollylly?

Symbolic meaning of the name of the Store Eery A

Modern interior design is saturated with original shades. The range of finished products does not always contain the desired halftone. The mixing table will help at home to get the desired result. Information will be useful not only when repairing an apartment. Knowledge of mixing colors is useful to a wide range of persons: novice painters, workers of car operators, decorators and other creative parts.

Mixing experiments: what you need to know in advance

The world around the world is filled with a wide color palette, but all colorful splendor is based on three main colors: blue, red and yellow. It is at the expense of their mixing that the desired halftone is achieved.

To get a new shade, use basic kokes in different proportions. The easiest example, how to get green. The answer is extremely simple: mixing yellow dye with blue. The visual table of primary, secondary and transitional colors, obtained by mixing, is presented further:

This table will help to understand that the question is how to get yellow, in itself incorrect. It is impossible to achieve the connection of other components, since the yellow refers to the three main colors. Therefore, in the event of a yellow need, a ready-made dye is acquired or a pigment from natural products is extracted, which is not entirely appropriate.

The same initial colors taken in different proportions, when mixed, give a new result. The greater the volume of one dye, the end result after mixing it turns out closer to the original shade.

Conduct experiments needed taking into account well-known rules. If combining chromatic colors, which in the color circle are close to each other, after mixing, get paint with a pronounced chromatic tint, although not possessing a clean tone. The connection of dyes located in opposite sides leads to the formation of a acromatic tone, in which the gray shade prevails. Focusing in the optimal combination of paints will help the chromatic circle:

Attention! Mixing dyes does not always lead to a resistant result. Some paints under the compound provoke a chemical reaction, due to which the decorative coating is further cracking. There are cases when the desired background with time is gray or dark.

For example, if you take a film of red and lead whitewash, the resulting bright pink kel after spending some time. It is desirable to get the desired tone to take the most limited number of source paints. When mixing, their compatibility is necessarily taken into account. For example, oil-based dyes are sensitive to solvents. Darkening or fast burning materials are better to immediately exclude. Table combinations that do not use, prevent errors in the creative process:

The manifold shades red

Red consists in the top of the source colors constituting the database. Therefore, even the minimum set of colors without it does not do. However, the question is how to get a red color when mixing paints sometimes still occurs. This is due to the fact that Majent is involved in the press, so creative searches, how to get red, regular. Everything is solved extremely simple: to obtain natural red yellow, mixed with Majent in volumes 1: 1.

Color range of red diverse, therefore, the combination options are set:

Comment! Beautiful purple color can not be obtained by a purple compound with red. The only way out to achieve a bright shade - to find a red paint without yellow impurities and mix with blue.

The manifold shades of the red demonstrates the next circle. It is worth noting that the addition of white paints to any mixture leads to tone lightening, and black - to the dimming.

The table presented will help to deal with the names of the shades of the Red:

Blue variations

An equally rich palette of shades gives mixing with a blue dye entering the base triad. Therefore, its presence in any set is required. However, even a set of 12 paints sometimes does not meet the needs in a true blue tone. Cause - color variations. The classic tone is called the piano, and it is often replaced by ultramarine, which is characterized by a bright dark shade with a slight presence of purple. Therefore, the question is how to get blue no longer seems absurd. The exit from the situation will be adding to the base color of the white in the ratio of 3: 1. In the same way, it is obtained blue, only bleached when combined, use more.

An interesting color of blue with a moderately saturated result is obtained by connecting a dark ultramarine with turquoise.

Equal volumes of blue and yellow dye will give a dark blue green tone. The introduction of white contributes to some clarification, but the brightness is reduced. The reason lies in the combination of three components, and the more there are more, the more dull color turns out.
To get a turquoise color, mix cyanine blue and add slightly fewer green. This tint is also called Aquamarine.
Received from equal volumes of blue and glowing color is called Berlin Azure. With the introduction of white saturation decreases, but the purity of the shade does not go away.
Blue with red killers in proportion 2: 1 give blue with a shade of violet. The resulting color is covered with the introduction of white.
Mixing in the same parts of the blue and pink-majesty will give royal blue, which is characterized by unusually brightness.
Darkening the blue is obtained when it is mixed with black in the proportion of 3: 1.

The assistant in mixing experiments will be the table with the names of the shades of blue:

Multifier green

The original green is usually represented in all sets, in the absence of the desired dye there are no problems with receipt. The connection of yellow with blue gives the desired green background. But any direction of creativity, whether painting, design of premises or another version of decorating items requires a wide green palette. The basic principle of all experiments is to change the proportions of the base colors, white or black dye is used for lightening or darkening the background.

The connection of blue and yellow with a small addition of brown is khaki. Green with a small amount of yellow forms olive.
Traditional salad - the result of mixing green with white. Adding yellow or blue can help adjust the warmth.
Attention! The quality of the source components affects the saturation of the green color. The more intensive basic tones, the brighter there will be a mixing result.
The yellow-green effect will turn out when combining yellow with blue in a 2: 1 ratio. Reverse proportion will lead to a blue-green tone.
Dark green color is achieved by adding black in half volume.
A warm light green background is formed from a white, blue and yellow paint mixture in a 2: 1: 1 ratio.

The variety of green shade colors demonstrates a circle. The center is located the base dye, then there is an additional component, after - the result of mixing. The last circle is the experiments of the resulting tone with the addition of white and black dye.

The next table will become an assistant when conducting experiments.

Other combinations of shades

The color kaleidoscope is not limited to the combination of basic dyes. For example, it is often necessary gray. Different proportions of Belil and black pigment will give a wide achromatic palette.

How to get an ivory color? Basic will be white, it is gradually in small portions to add ocher and dark brown. OCC contributes to the manifestation of warm tones, an increase in brown leads to a cold background.

Another table demonstrates many mixing options:

How to get black? By connecting blue, yellow and purple. In stock, they are not always, so the assistant will be three basic dye. Green combination with red will also give a kind of black, but it will not be clean.

Conclusion

Even if at what question you did not find descriptions, the tables will be asked, which not only represent the mixing recommendations, but also clearly demonstrate the result of experiments. The results of their own experiments on mixing may differ somewhat from the above, it all depends on the composition of the dye and the surface on which it is applied.

It is located between green and blue.

It is presented in a variety of variations. It includes both soft, and bright, intense colors. If you fail to find the finished paint, you will have to mix green and blue yourself. As a result, we will get the desired shade. If you try to briefly answer the question of which colors to mix to get a turquoise color, it should be noted that it is necessary to take advantage of cyanium blue and fewer green. Let us discuss in more detail in this material.

Selection of paints

So, we need to get it in practice, now describe in detail. First you need to decide on the required tint. The word "turquoise" is most often called a mixture of green and blue with a predominance of the first. However, we can achieve different shades.

Easily add a drop with light gray or white paint. As a result, we will get a more gentle shade. You can also mix saturated blue, green and yellow. As a result, we get bright turquoise. It remains to choose between a bright or soft tint.

The foundation

So, earlier we have already managed to get a turquoise color. How to get it in other ways, consider further. We have already found that we need blue and green paint. Their base can be any aquatic, oil, acrylic.

However, it should be remembered that the same type of paints are better mixed. Purchase everything you need is best in one of the specialized stores for artists. This should examine the entire presented range. It may be possible to find the necessary shade in the finished form.

Watercolor

How to get a turquoise color when mixing paints, we already know: we need yellow, green and however it is better to take them along a small drop to achieve maximum accuracy when creating the required paint. If you are a novice artist, better give the preference of watercolors. With this type of paints it is easy to handle. In addition, they are well mixed. Watercolor, as a rule, is sold in small tubes. Yellow paint will suit the pale shades.

Water and space

If you are interested in how to get a turquoise color when mixed, so that it is more muted, mix green and blue with white. Suppose there will be a tropical beach in the picture, then we use a warm cream as the basis for transferring the image of sea water to paper.

The cleaner white is suitable for creating a drawing of a distant cold turquoise planet. We use the shades of blue, which is close to the green spectrum. You can try ultramarine, azure, cobalt, cyan or any other similar option. The main thing is that it is closer to green than to purple.

Any pigment contains a minor number of other colors. Thus, the paint of an arbitrary shade will be well mixed with a different color. In practice, it is very convenient.

Saturated color

So, to solve the issue, how to get a turquoise color when mixing paints, used blue and however, you can achieve even better results. For this we will use a blue paint containing green pigments. It is impossible to find a "clean" basis.

In particular, it concerns blue. In theory, it should give a yellow green with yellow, and with red - excellent purple. In practice, these faces are blurred. The fact is that blue is always approaching red or green due to the imperfect chemical purity of each pigment.

For maximum saturated color, we take the necessary ingredients. We are talking about the already familiar blue and green shades.

We apply to the edge of the palette small number of cyanic paint. In this case, it should be blue-green.
Go to the next step. Nearby place a little green paint. If it is not, you can get this color yourself. To do this, mix an equal amount of yellow and blue. Instead of the palette, any clean dry surface is suitable. However, the subject that is used in a similar way, for anything else cannot be applied.
Mix blue and green in terms of 2: 1. The first pigment should be greater. You can also experiment with proportions, however, as a sample, the reduced ratio is better. A little more green paint will give a saturated shade of the sea wave. If we reduce the content of green, we get a thin turquoise. It approaches blue.

So we figured out, from which elements is turquoise color. How to get it, described in detail above.

Turquoise color, which includes all the shades of the natural stone of turquoise, is a mixture of green and blue colors. The shade of turquoise depends on the ratio of these colors: from the sky blue (Curaçao color) to a light green shade of the sea wave (aquamarine). This color is considered the coldest in the spectrum of colors, so it affects a person soothing. This effect is used when designing interiors in which it is necessary to create a pacifying, relaxing atmosphere. Incredibly beautiful color of precious turquoise looks good in clothes, perfectly combined with natural skin shades.

You will need

Blue paint;
- Green paint;
- palette;
- Brush or Mastichin.

P & G placement sponsor Article on "How to get a turquoise color" How to mix colors of paint How to pack flowers like weave a wide bead bracelet

Instruction

To obtain turquoise color, take blue and green paint. These must be pure shades of both colors, as close as possible to samples in a standard color circle. Unlike the shades of blue, turquoise shades are not just a lighter blue - they have direct relationship with green.

Take a certain amount of blue paint on the palette and begin to add green to it. Depending on what kind of shade is bluish or greenish - you intend to get, continue to mix these two paints until the desired result is achieved.

The band shades of turquoise color is quite large: it can be both soft, muted, pastel, and bright, juicy colors. The brightness of the color is achieved by using pure undiluted paints, of which the color consists. To get pastel turquoise shades, add a little bleel to the color received on the palette. Variating their number, you can get the colors of varying degrees of brightness. Mute turquoise bright radiance can also be added a small amount of gray paint. Color will acquire no less noble sound.

If you are working with water-soluble paints of watercolor or guaashi, then you can achieve a variety of shades you can also use turquoise diluted water. Opposing paint on white paper is a loose, transparent layer, you can get brighter tones of turquoise.

The nature of us is the most ingenious artist - we can learn to a harmonious combination of different colors. Turquoise color includes all the shades of water. A natural satellite of water in nature is sand. Therefore, turquoise tones look harmoniously with a variety of sands of sand and land - brick, bright coral, golden-ocher, grayish-sand, coffee and many others.

How simple

Selection of paints

The foundation

Watercolor

Water and space

Any pigment contains a minor number of other colors. Thus, the paint of an arbitrary shade will be well mixed with a different color. In practice, it is very convenient.

Saturated color

For maximum saturated color, we take the necessary ingredients. We are talking about the already familiar blue and green shades.

We apply to the edge of the palette small number of cyanic paint. In this case, it should be blue-green.
Go to the next step. Nearby place a little green paint. If it is not, you can get this color yourself. To do this, mix an equal amount of yellow and blue. Instead of the palette, any clean dry surface is suitable. However, the subject that is used in a similar way, for anything else cannot be applied.
Mix blue and green in terms of 2: 1. The first pigment should be greater. You can also experiment with proportions, however, as a sample, the reduced ratio is better. A little more green paint will give a saturated shade of the sea wave. If we reduce the content of green, we get a thin turquoise. It approaches blue.

So we figured out, from which elements is turquoise color. How to get it, described in detail above.

One of the most beautiful flowers on earth is turquoise. He is striking with his piercing and beauty, incomparable with any other color. In common, it is called the color of the sea wave. Turquoise color is very fashionable, it is used in the interior, clothing and many other things. It is widespread in the home interior, but you should not overdo it with it, since it is possible to achieve unsatisfactory results, it is better to harmonize it with various shades of other colors. Turquoise color in any interior brings exceptionally positive emotions.

He always caused respect for people employed by the civil service and a difficult mental job, as it has the opportunity to assist in making the right decisions. The imperial stone of ancient Egypt was considered turquoise, and after the death of Turquoise, their tombs were separated. Turquoise color make up a few shades: green and blue. The color of turquoise refers to cool colors, but compared to other colors of the same group is the warmest. Like many other colors, turquoise has its meaning and influence on people. This color brings a feeling of freshness and natural purity.

Turquoise color greatly affects a person, it is able to remove irritability and fatigue. The difference in its shades is widely - from soft turquoise to deep blue-green. Turquoise color is used in the design of spa salon health complexes, massage rooms. It is usually combined with white. It is not surprising, as he, like no other, gives a feeling of calm and relaxation. Doctors revealed its significant impact on recovery in rehabilitation centers.

In addition, doctors advise most of the time to be in his surroundings in order to achieve the best result. So how to get a turquoise color? To do this, mix a few paints of different colors. Get turquoise shades. If you take a blue or blue-green paint, mixing it with white. To make turquoise color at home, you will need paints with blue and green. It is desirable that it was the purest shades close to typical patterns of the color circle. You need to take a small amount of blue paint and mix there we gram green.

It all depends on the artist, what a tint he wants to have in the end, bluish or greenish, you just need to continue to add green to get the desired result. In order to make the maximum brightness of the color, it is necessary to use palettes of undiluted paints. In many respects, the color depends on the used paints, it is preferable to use watercolor and gouache paints, since only they are capable of more accurately convey the brightness of the color of turquoise. It is not difficult, and everyone can afford to make and use this finest color. You need to try and experiment, draw and enjoy beautiful.

Turquoise color can be easily obtained when making paints. By definition, turquoise is the shade of blue and green, the color of the sea wave close to cyan. There are a number of ways to get a turquoise color, they will depend on the desired artist.

Turquoise color in nature, its meaning

Turquoise is one of the most beautiful shades, in the surrounding world it is widespread. This tone can be seen at sea near the resort shores, turquoise painted water in the area of \u200b\u200bsea lagoons, various oases and water quarries. Different shades of turquoise are observed in the sky in the early clock in the morning. This color is not present in the main palette, it must be obtained by connecting paints.

Psychologists are called turquoise cold, mysterious, although people are associated with sincere conversations with friends. In the countries of the East, the color symbolizes faith, healing, compassion, and in Europe used to be considered a talisman giving good luck.

Alternative medicine applies turquoise in color therapy: This shade is useful for the eyes, it is able to strengthen the immune system, reduces the risk of overloads, depression and stress. It is believed that this tone is very harmonious, it is designed to add peace of calm, equilibrium, helps to control emotions.

Getting a turquoise tint

Make a turquoise color with your own hands. To do this, you can use gouache, watercolor, acrylic paints, you just need to mix them in certain proportions. Since turquoise is called a mixture of green with a droplet of blue, then for the preparation of paint, two of these basic tones will be required.

There is no clear instruction in the number of colors. The search is a creative process where the norms of the paints are selected individually. For work needed:

palette or white plate;
tassels;
water cup;
paper.

The amount of greenery that does not have extraneous impurities should be taken to work, and after adding blue. It follows after the introduction of each new portion of the material. In any case, the number of blue paint should be smaller than green. If the color seems appropriate, it should be tested. To do this, make a smear on paper - a homogeneous turquoise tone should remain on it.

There are various shades of turquoise - sea wave, azure, blue-green, as well as exotic for hearing newcomers of Curaçao, aquamarine, the color of eggs Drozda and others. It is worth considering the process of manufacturing the most popular travelers turquoise more.

Lightly turquoise

To create a lighter tone, it will be required not blue, but blue paint. It is made by the simplest method - add a little bleel to the desired degree of clarification. Then begin to introduce a blue tone into green, until it becomes a "digest" turquoise hue. Also, professionals are often introduced into a mixture of yellow paint droplets - it gives the brightness and ease of greens, makes it salad, so the finished turquoise will be air, very beautiful. If the finished tone seems not delicate enough, it can be diluted with any amount of white paint until the pastel shade is obtained.

When the bright turquoil must also be "cooling", you can enter a slightly gray paint. That is mixed green, blue, white and gray tone. As a result, it turns out an unusual muted color, perfectly suitable for drawing the sky paintings.

Dark turquoise

The dark tones of turquoise make it yourself too easy. To do this, purchase cyanic paint, which already has a green with a low blue tint (implemented in the store for artists). On the palette you need to put a little such paint, then add a regular green roller with small portions. Dark turquoise color is obtained by introducing a small volume of greenery, while thorough mixing is very important. Some experts for even greater darkening of the tone add a little brown, such a color will be a bit warmer than an ordinary turquoise.

Aquamarine

Sea color is obtained in a similar way. For him, two standard flaps will be required - blue and green - approximately equal proportions. They are stirred to uniformity, after the meager amount of white paint is administered for some clarification. Depending on the amount of white, the sea wave will vary from saturated to more pale. In professional professionals, they call a mixture of blue phthalocyanine and titanium dioxide, but the usual (classical) gouache from the store is quite suitable for the average man.

Color ratio table for obtaining turquoise

In the spectrum of the main colors turquoise not to see, there are only basic tones. But by mechanical mixing of paints, almost any desired color can be made. Here is a table with data that will help navigate in the manifold of the shades of turquoise:

Make a shade under consideration, even a schoolboy. Experiments will help create an original color - for this we need only paint, brushes, palette and a little fantasy!

Turquoise color, also known as aquamarine, in the color spectrum is located between blue and green. It is manifested in many shades, starting with soft, pastel colors and ending with bright, intense colors. If you fail to find the finished paint of suitable color, you will have to mix the blue paint with green to get the desired shade. To get the main turquoise: Mix cyanine blue with a slight less than green.

Steps

How to pick up paint

Determine what shade turquoise you need. The word "turquoise" is usually called a bright mixture of blue and green with a predominance of blue. Nevertheless, you can create different shades of turquoise: add a drop in white or light gray paint to a mixture to get a gentle shade of turquoise, or mix the saturated shades of blue, green and yellow to obtain a bright turquoise. Determine whether you need a bright or soft shade.

Buy Blue and green paint. The basis of paint can be any - acrylic, oil, water - but the same type of paints are mixed better. You can buy paint via the Internet or in the store of goods for artists. Do not be lazy to learn the entire range: You may find exactly the shade you need. If you start with turquoise, you can mix small drops of blue, green and yellow to choose more accurately.

If you are a novice artist, try starting with acrylic paints. They are easy to handle and they mix well. They can always be bought in small inexpensive tubes.
If you buy paint in the art goods store, ask the seller, what kind of paints with mixing give a good turquoise color. Aware personnel will be able to offer you suitable tones of blue and green, which are better suited to get the shade you need.

If you need pale shades, buy white and / or yellow paint. If you need a larger and muted shade of turquoise, try mix blue and green with white or yellow. White or yellow shade is your preference, so choose the color that agrees with your taste and style of the composition. For example, if you draw a tropical beach, you can choose a warm cream as a basis for the image of sea water. A cleaner "artificial" white suitable for the image of a cold distant turquoise planet.

Use the shades of blue, close to the green spectrum. Try cyan, cobalt, azure, ultramar - any shade of blue, which is closer to green than to purple. Any pigment contains small amounts of other colors, and this means that the paint of any shade will be well mixed with some other specific color. Turquoise is a blue mixture with green, so try to use a blue paint that already contains green pigments. You should learn to determine the color displacement of the eye color: blue-green shades closer to green, and purple-blue - to the red.

How to get a saturated turquoise

Prepare green and blue paints. Apply a small amount of blue-green (cyano) paint to the edge of the palette, and next to a little green. If you want, squeeze both paints into one cell.
- If you do not have green paint, you need to do it. Mix in equal amounts blue with yellow to get green.
- If you do not have a special palette for paints, you can use for mixing colors any clean dry surface. Try mixing paints on a plate, on a sheet of paper, on a piece of cardboard or on ceramic tiles. Do not use items necessary for other purposes.
Mix blue with green in relation to 2: 1. Turquoise contains more blue pigment than green, so add two parts of the blue and one part of the green to the mixture. Do not be afraid to experiment with proportions, but take as a sample ratio of 2: 1.
- A little more green paint - say, 2 pieces of blue for 1.5 parts of the green - will give a saturated sea wave color. The proportion of green is smaller than the standard will give a thinner turquoise, close to blue.
- Add a little yellow to get a brighter shade. Try to mix yellow with blue in a ratio of 1: 5 or 1: 6. Or add yellow in a blue mixture with green.
- If it turned out too bright shade, add a drop of white. White will soften the shade of turquoise and make it less saturated.
Mix the paints. To begin with, apply in the palette of the smear of green paint, and then add two smears of blue. Mix the paints to become uniform. In the mixing process, green is dissolved in blue, and you will have a distinct turquoise color.
- Use so many paints as you need for the composition, or even a little more. If you get to mix the paints re-in the drawing process, it is likely to break the proportion and get an uneven shade of turquoise.
Correct the mixture until the result satisfies you. After completing the mixing of paints on the palette, see if you like the resulting shade. Apply a little paint on the cloth - usually the paint changes slightly after applying to the surface. If you are dissatisfied with the result, you continue to add blue, green, yellow or white paint with small portions until you achieve the desired turquoise shade.

Draw. When you finish mixing paints, you can use them. Make sure that the resulting shade of turquoise you like. You can draw the same brush that you mixed paint, but for the exact color of color it is better to clean the brush before drawing. If you need to replenish the stock of turquoise paint, try to accurately observe the proportions that you used for the first time.
- If you have to re-mix the paints during the drawing process, but you cannot get the same shade, try mixing a completely new portion of the larger volume and block the first touches of the turquoise, the color in the figure is uniform.

How to get a pale turquoise

Use white color as basic. If you need a gentle shade of turquoise, start with white or very light blue. White paint will be the basis of color, so take it as much as it is necessary for the entire composition, or even a little more. Try using a gray very light shade if you need a darker shade of turquoise.

Turquoise color how to mix paint. How to get turquoise

Read also

Mixing experiments: what you need to know in advance

The manifold shades red

Blue variations

Multifier green

Other combinations of shades

Conclusion

Selection of paints

The foundation

Watercolor

Water and space

Saturated color

Selection of paints

The foundation

Watercolor

Water and space

Saturated color

Turquoise color in nature, its meaning

Getting a turquoise tint

Lightly turquoise

Dark turquoise

Aquamarine

Color ratio table for obtaining turquoise

Steps

How to pick up paint

How to get a saturated turquoise

How to get a pale turquoise