Portraits for wood burning. Burning photos on wood: an original gift for family and friends
Read also
In the technique of burning on wood, many different images of ornaments, patterns, images of animals, birds, plants, people, nature, and so on are performed. For transferring the image onto a wooden base, black graphite or ordinary carbon paper is most often used. Some burners offer to print the drawing on parchment paper, glue it to the tree and burn the drawing over it. When heated, the parchment will melt, leaving scorched lines underneath. Some especially gifted pirogathists with artistic inclinations draw images, including portraits of people, by hand with a simple pencil, down to the smallest detail. But what if you don’t know how to draw, but you want to burn out a portrait or other image without copying? Today's article will tell you how to make wood burning photos at home.
Methods for burning photos on wood
Photos with the image of people, animals, flora are processed in a special program, for example, in Photoshop, to obtain an image consisting of small strokes and dots. Then sketches of these images are printed on a printer on parchment paper and transferred to a wooden base using a red-hot burner. Remains of parchment can be easily removed without leaving a trace.
We study burning a photo on wood using an image
A portrait of a person, any image of an animal, plant or something else, at your request, is printed in a schematic expansion on a laser printer. Ideally, this image is printed on thin photo paper. Then the burner with a round tip is used on the seamy side of the image, which is tightly pressed with toner against a wood or some other base. When heated with a hot burner, the toner on the paper melts and prints onto the surface you want. The burner should be heated to the lowest possible temperature so that the paper does not catch fire from contact with it.
It only takes a few minutes to transfer an image in this way, which is a huge advantage of this method. Plus, it's the perfect way to get an image onto your work surface for beginners. When the toner heats up, tiny pieces of paper may remain on the surface in some places, which can be removed after the substrate has completely cooled down by slightly dampening a cotton pad in warm water.
This method is probably the most expensive in terms of budget, but it will take a minimum of effort from you to burn it out. Typically, such a laser apparatus is attached to a computer that will act as a brain. A photograph with the desired image is loaded into it, processed and sent to the laser. Then the laser burns the image line by line with translational movements. You just have to cover it with varnish or paint for color.
Paintings burned from your photo on a wooden base can be ordered on the Internet. The price of such an image will depend on the complexity of the work, timing and manufacturing method. For example, an American pyrographist asks for $ 250 for a 27x35 cm family portrait burned from a photograph. He makes his paintings only by hand using only metal and flame, each of them is unique and made to order. In addition, we think that there is still a mark-up for painstaking work. During the three years of its official website existence, he sold only 48 paintings. As you can see, there are not many connoisseurs of diligence at this price.
Things are much better with another English pyrographist, who burns for sale paintings, typical, standard, not as complex and individual as those of his American colleague. Therefore, his paintings using the wood-burning technique are definitely cheaper, for example, he estimated a portrait of the singer Lana del Rey measuring 20x20 cm at $ 35, a map of the ancient world based on The Lord of the Rings, measuring 30x30 cm at $ 45.
As you can see, the bulk of its potential buyers are media fans and moviegoers. For 4 months of work, this little-known pyrographist has sold about 30 similar images.
Patriotic attributes and various gags in the form of wooden plaques are in great demand.
There are a sufficient number of talented pyrographic portrait painters in Russia as well, their sites or groups can be easily found by typing in the search box “burning your favorite photo on wood to order”. Below are some of the works of our compatriots who are professionally engaged in burning portraits on wood.
Related videos
We bring to your attention several videos on burning portraits on a tree with a visual result.
You can burn various ornaments, patterns, images of animals, plants, people on wood, and you can endlessly enumerate. In order to transfer a sketch to wood, carbon paper is mainly used. Some of the masters print the drawing on parchment paper, attach it to wood, and burn it out on paper. It melts, leaves scorched touches. Very experienced craftsmen draw their own sketch on a tree that they want to burn. Portraits are done in the same way. They are drawn with a simple black pencil on a blackboard and only then the process begins. But there are also people who draw very poorly on their own, and I really want to burn out the portrait of their relatives. What to do then? So, let's answer this question and consider the topic of the article, which sounds like this: "Burning photos on wood."
Variety of options
The very first way is image processing in Photoshop. The image is processed so that it is all in small strokes. Then the drawings are printed on parchment paper. They are attached to the wood and begin to burn.
The second of the methods is when an image of a person is printed on a laser printer in a schematic expansion. For this, it is best to use special thin photographic paper. It is attached to the board with the wrong side and burning begins.
Please note that the heating temperature of the burner must be as low as possible, otherwise the paper may catch fire.
This method will not take you much time. Because of this, he is the best in burning portraits, not only for experienced craftsmen, but also for beginners. After burning, you need to remove the pieces of paper. This requires the portrait to be completely cooled. Then we take a cotton pad, moisten it with water and wipe the finished work.
The third way is to use a special-purpose laser machine. This method is not cheap, but it does not require much time and effort. This laser is attached to a personal computer. It performs the function of the brain. We load a photo into it, process it and send it to the laser to do the job. Then the laser itself begins to burn out the image that it received. You just need to varnish the finished portrait.
Now let's look at a few master classes on burning portraits.
Portrait of a girl
To work, you will need the following tools and materials:
- Copy paper;
- Plywood sheet;
- Sandpaper;
- Simple black pencil;
- Burning apparatus;
- Brush;
- Clear nail polish.
First you need to prepare the image itself. We do this using a special program and print. Then level the surface of the plywood with sandpaper.
We fix the copy paper and the printed sketch on the plywood. We circle. After that, be sure to check if all the lines are printed.
We connect the burner to the mains and wait for it to warm up. We burn out. We cover with a layer of colorless varnish.
Here's the picture!
For a cute girl
To work you will need:
- Sketch;
- Wood;
- Burning apparatus;
- Copy paper;
- Sandpaper;
- Colorless varnish;
- Brush.
Let's get to work.
We scan the selected photo and print it in the required size. We prepare the wood. We align it with sandpaper.
Then we put carbon paper on the finished base, and a drawing on top of it. We fix it with scotch tape. And we begin to trace the outline. At the end, we check if all the lines are printed on the wood. If it’s bad somewhere, then we finish it neatly.
We connect the device for burning to the network and wait until it heats up to the required temperature. We start to burn. After the work is completed, you need to carefully remove the excess pencil lines. We do this with an eraser.
Cover the finished portrait with a layer of colorless varnish. We remove it in a place inaccessible to children until it dries completely.
Related videos
Similar articles:
Today we will show a master class in which you will learn a lot of information on wet felting from natural wool for novice needlewomen. Better start ...
It is often possible to observe in different places the accumulation of car tires, which is usually a pity to throw away. Especially for such cases in this article ...
In the technique of burning on wood, many different images of ornaments, patterns, images of animals, birds, plants, people, nature, and so on are performed. For transferring the image onto a wooden base, black graphite or ordinary carbon paper is most often used. Some burners offer to print the drawing on parchment paper, glue it to the tree and burn the drawing over it. When heated, the parchment will melt, leaving scorched lines underneath. Some especially gifted pirogathists with artistic inclinations draw images, including portraits of people, by hand with a simple pencil, down to the smallest detail. But what if you don’t know how to draw, but you want to burn out a portrait or other image without copying? Today's article will tell you how to make wood burning photos at home.
Methods for burning photos on wood
Photos with the image of people, animals, flora are processed in a special program, for example, in Photoshop, to obtain an image consisting of small strokes and dots. Then sketches of these images are printed on a printer on parchment paper and transferred to a wooden base using a red-hot burner. Remains of parchment can be easily removed without leaving a trace.
We study burning a photo on wood using an image
A portrait of a person, any image of an animal, plant or something else, at your request, is printed in a schematic expansion on a laser printer. Ideally, this image is printed on thin photo paper. Then the burner with a round tip is used on the seamy side of the image, which is tightly pressed with toner against a wood or some other base. When heated with a hot burner, the toner on the paper melts and prints onto the surface you want. The burner should be heated to the lowest possible temperature so that the paper does not catch fire from contact with it.
It only takes a few minutes to transfer an image in this way, which is a huge advantage of this method. Plus, it's the perfect way to get an image onto your work surface for beginners. When the toner heats up, tiny pieces of paper may remain on the surface in some places, which can be removed after the substrate has completely cooled down by slightly dampening a cotton pad in warm water.
This method is probably the most expensive in terms of budget, but it will take a minimum of effort from you to burn it out. Typically, such a laser apparatus is attached to a computer that will act as a brain. A photograph with the desired image is loaded into it, processed and sent to the laser. Then the laser burns the image line by line with translational movements. You just have to cover it with varnish or paint for color.
Paintings burned from your photo on a wooden base can be ordered on the Internet. The price of such an image will depend on the complexity of the work, timing and manufacturing method. For example, an American pyrographist asks for $ 250 for a 27x35 cm family portrait burned from a photograph. He makes his paintings only by hand using only metal and flame, each of them is unique and made to order. In addition, we think that there is still a mark-up for painstaking work. During the three years of its official website existence, he sold only 48 paintings. As you can see, there are not many connoisseurs of diligence at this price.
Things are much better with another English pyrographist, who burns for sale paintings, typical, standard, not as complex and individual as those of his American colleague. Therefore, his paintings using the wood-burning technique are definitely cheaper, for example, he estimated a portrait of the singer Lana del Rey measuring 20x20 cm at $ 35, a map of the ancient world based on The Lord of the Rings, measuring 30x30 cm at $ 45.
As you can see, the bulk of its potential buyers are media fans and moviegoers. For 4 months of work, this little-known pyrographist has sold about 30 similar images.
Patriotic attributes and various gags in the form of wooden plaques are in great demand.
There are a sufficient number of talented pyrographic portrait painters in Russia as well, their sites or groups can be easily found by typing in the search box “burning your favorite photo on wood to order”. Below are some of the works of our compatriots who are professionally engaged in burning portraits on wood.
Related videos
We bring to your attention several videos on burning portraits on a tree with a visual result.